Issue link: https://aalbadent.uberflip.com/i/107865
PARTIAL DENTURE ACCESSORIES Partial Denture Mechanical Properties Tensile Strength psi (MPa) Yield Strength psi (MPa) Modulus of Elasticity psi (MPa) X106 Elongation Percent % Vickers Hardness Density Color Melting Range Composition HV1 g/cm3 °F (°C) Ceramic Restorations PFM Crown & Bridge FMC Partial Denture Framework Single Units & Multi Unit Bridgework Onlays, Posts & Cores Sub-Structure for Polymer Crown & Bridge Resins Implant Super Structures Maryland Bridge ISO Classification of Properties Registrations & Certifications Vera PDI (hard) 109,500 98,000 (755) (675) VERA PD SOLDER cobalt based casting alloys. Vera Vera PD Solder… a premium high PD Flux is also Boron enhanced fusing solder for cobalt based partial for improved fluidity and increased denture casting alloys. This solder is fabrication performance. Boron enhanced for increased fluidity and performance. Use Vera PD Solder 359 8.7 White 2,480-2,534 (1,360-1,390) Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Type 5 FDA, CE, NIOM, CCq 26.1 (0.18) 7 354 8.7 White 2,507-2,552 (1,375-1,400) Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Type 5 FDA, CE, NIOM, CCq Vera PDN (hard) 109,500 98,000 (675) (755) Use Vera PD Flux when soldering 6 Vera PDI (regular) 109,500 86,500 (755) (597) VERA PD FLUX 26.1 (0.18) 26.1 (0.18) 6 359 8.7 White 2,480-2,534 (1,360-1,390) Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Type 5 FDA, CE, NIOM, CCq Vera PDN (regular) 109,500 86,500 (755) (597) 26.1 (0.18) 7 354 8.7 White 2,507-2,552 (1,375-1,400) Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Type 5 FDA, CE, NIOM, CCq Vera PDS (hard) 109,500 98,000 (755) (675) 26.1 (0.18) 6 359 8.7 White 2,480-2,534 (1,360-1,390) Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Type 5 FDA, CE, NIOM Vera PDS (regular) 109,500 86,500 (755) (597) 26.1 (0.18) 7 354 8.7 White 2,507-2,552 (1,375-1,400) Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Type 5 FDA, CE, NIOM Packaging for the repair and construction of cobalt based partial frameworks. Apply Vera PD Solder via torch or Vera PD Solder 2 dwt (3.11g) packet 2 gram packet laser welding. Use Vera PD Solder in conjunction with Vera PD Flux for the best results. Vera PD Flux 1 oz (28.3g) jar CE 0120 Class IIa medical device in compliance with Directive 93/42/ECC 42 0120 License No. 296734; United States of America Department of Health and Human Services Food & Drug Administration (FDA) Aalba Dent products designated with our CCQ mark are Certified by Aalba Dent as continuous cast products from our proprietary state-of-the-art continuous casting technology. Products produced from this process exhibit unparalleled homogeneity, precise alloy chemistry and lower gas content. AalbaDent, Inc. is a registered, medical device manufacturer in compliance with applicable Good Manufacturing Practices Regulations, Federal/State laws, local environmental laws and regulations. Facility license No. 61179; State of California: Department of Health Services: Food & Drug Branch. 43