Issue link: https://aalbadent.uberflip.com/i/107865
VeraBond 2V PFM:Ni-Cr-Nb ® FOR FINE-GRAIN CERAMICS VeraBond 2V is a premium, high Its special properties are the result thermal or clinical distortion. High yield comfortable restorations are now strength, nickel-chromium alloy of two intelligent additions. First, a strength and great elongation make achievable like never before. VeraBond formulated for Vita1 and other bio-compatible 4% addition of Niobium VeraBond 2V a winner. VeraBond 2V 2V… a clinically proven restoration you European fine-grain porcelains. provides oxidation control, creating a mechanical properties exceed industry can prescribe with confidence. VeraBond 2V raises the industry tenacious yet light oxide. In addition, standards by a factor of three! standard and will exceed your Niobium provides excellent melting and performance expectations of typical non-Be base metal formulations. 1Vita Low specific gravity, excellent mark of Vita Zahnfabrik castability and high yield strength permit Packaging & Accessories VeraBond 2V 208 gram box (40 ingots) Vera Solder 2 dwt (3.11 g) packet 2 gram packet casting fluidity for sharp margins and the design of light weight, thin wall consistent castings every time. Second, copings and fine interproximal abut- a tightly controlled addition of 9% ments. Aesthetically pleasing and molybdenum creates high strength to offer uncommonly high resistance to Vera Flux 1.5 oz jar (42.5 g) Tensile Strength APPLICATIONS Porcelain fused to metal (PFM), single units, long-span multiple unit bridgework, maryland bridge, metal sub-structure for polymer resins (acrylic & composites), full cast crowns, implant superstructures. 14 PORCELAIN COMPATIBILITY VeraBond 2V performs best with traditional fine-grain porcelains: Vita, Ivoclar-Classic, Shofu-Vintage, Duceram, Will-Ceram, Finesse, as well as other commercially available fine-grain porcelains. Yield Strength 148,000 (1,021) 108,000 (754) psi (MPa) Verabond 2V psi (MPa) Elongation Percent % 18 Vickers Hardness HV1 373 Density Color Coefficient of Expansion Melting Range Composition 8.2 White 13.7 2,354-2,435 (1,290-1,335) NIOM Ni 78.5% Cr 12.8% Mo 9.0% Nb, Al, Si, Ti g/cm3 (@500°C) X10-6 °F (°C) 0120 certified 15