Issue link: https://aalbadent.uberflip.com/i/107865
Continum V PFM:Ni-Cr-Mo ® FOR FINE-GRAIN CERAMICS Continum V… formulated to work best with today's modern fine-grain thermal expansion is optimized for formulation enhances porcelain bond, Continum V will resist the formation porcelains. major porcelain brands such as Vita1, increases porcelain-to-metal retention, of dark finish lines at the margins. Ivoclar's IPS Classic, as well as other and improves oxidation control for a coefficient of thermal expansion, a modern fine-grain porcelains. light and resilient oxide. Continum V's balanced titanium addition, and higher Continum V is produced with our titanium (Ti) acts as an oxygen chromium (16%) for improved proprietary continuous casting scavenger, chemically bonding with corrosion resistance. technology yielding an essentially gas feldspar (SiO2) and kaolin (K2O), found free alloy, unparalleled homogeneity, in all porcelains. Titanium also and precise chemistry. Degassing provides anti-greening properties for Continum V provides a 13.8 Packaging & Accessories Continum V's 13.8 coefficient of Its unique titanium enriched more esthetic restorations and Use only the best… Continum V. 1Vita mark of Vita Zahnfabrik Continum V is not required, saving Continum V 202 gram box (40 ingots) you valuable production time. Vera Solder 2 dwt (3.11 g) packet 2 gram packet Vera Flux 1.5 oz jar (42.5 g) Tensile Strength APPLICATIONS Porcelain fused to metal (PFM), single units, long-span multiple unit bridgework, maryland bridge, metal substructure for polymer resins (acrylic & composites), full cast crowns, implant superstructures. 18 PORCELAIN COMPATIBILITY Continum V performs best with traditional fine-grain porcelains: Vita, Ivoclar-Classic, Shofu-Vintage, Duceram, Will-Ceram, Finesse, as well as other commercially available fine-grain porcelains. Yield Strength Modulus of Elasticity Elongation Percent Vickers Hardness Density Color Coefficient of Expansion Melting Range Composition 150,200 (1,036) 100,800 (695) 29.0 (0.20) 15 323 8.0 White 13.8 2,110-2,403 (1,154-1,317) Ni 71.9% Cr 16.0% Mo 9.0% Al, Be, Ti psi (MPa) Continum V psi (MPa) psi (MPa) X10 6 % HV1 g/cm 3 (@500°C) X10-6 °F (°C) 19