Issue link: https://aalbadent.uberflip.com/i/107865
PFM ACCESSORIES PFM Mechanical Properties Tensile Strength psi (MPa) Yield Strength Elongation Percent Vickers Hardness Density Color 18 410 7.9 White 82,000 (566) 4 440 8.1 83,500 (576) 10 380 18 Modulus of Elasticity psi (MPa) psi (MPa) X106 121,000 (838) 30.4 (0.21) % Coefficient of Thermal Expansion Ni 77.9% Cr 12.6% Mo 5.0% Al, Be, Co Type 5 FDA, CCq 2,192-2,393 (1,200-1,312) Ni 76.5% Cr 11.5% Mo 3.5% Nb, Al, Si, Ti Type 5 FDA, CE, CCq 13.8 2,124-2,282 (1,162-1,250) Ni 74.8% Cr 12.7% Mo 9.0% Al, Be, Co Type 5 FDA, CCq White 13.7 2,354-2,435 (1,290-1,335) Ni 78.5% Cr 12.8% Mo 9.0% Nb, Al, Si, Ti Type 5 FDA, CE, NIOM, CCq Type 5 FDA, CCq Type 5 FDA, CCq Type 5 FDA, CCq Type 5 FDA, CCq 14.0 2,120-2,327 (1,160-1,275) White 14.1 8.1 White 373 8.2 X10-6 (@ 500 °C) °F (°C) VeraBond 196,000 (1,352) VeraBond II 119,000 (821) VeraBond V VERA FLUX VERA SOLDER Use Vera Flux when soldering nickel Vera Solder… a premium high fusing, based casting alloys. Vera Flux is pre solder for nickel based casting also Boron enhanced for improved alloys. This solder is Boron enhanced fluidity and increased fabrication for increased fluidity and performance. performance. Vera Flux has no odor Use Vera Solder for the repair and and can be thinned with distilled construction of nickel based frame- water in order to maintain proper works and copings. This brazing alloy is consistency. 120,000 (828) VeraBond 2V 148,000 108,000 (1,021) (754) Continum C 99,350 (685) 29.0 (0.20) 19 323 8.0 White 14.3 2,132-2,521 (1,167-1,383) 29.0 (0.20) 15 323 8.0 White 13.8 2,110-2,403 (1,154-1,317) 29.0 (0.20) 11 352 8.0 White 14.3 2,129-2,363 (1,165-1,295) 26.1 (0.18) 3 375 8.0 White 14.3 2,165-2,357 (1,185-1,292) Single Units & Multi Unit Bridgework Sub-Structure for Polymer Crown & Bridge Resins Ni 78.0% Cr 13.0% Mo 4.7% Al, Be, Ti Comandium II 124,300 87,435 (857) (603) Partial Denture Framework Ni 71.9% Cr 16.0% Mo 9.0% Al, Be, Ti 127,600 (880) FMC Ni 76.9% Cr 15.0% Mo 4.7% Al, Be, Ti Continum V 150,200 100,800 (1,036) (695) PFM Crown & Bridge Posts & Cores Registrations & Certifications Composition g/cm3 Ceramic Restorations ISO Classification of Properties Melting Range HV1 Ni 76.0% Cr 12.0% Cb 3.95% Mo, Al, Si, Ti 158,200 (1,091) Implant Super Structures Maryland Bridge compatible with both PFM and non-PFM applications. Apply Vera Solder via torch or laser welding. Use Vera Solder in conjunction with Vera Flux for the best results. Packaging Vera Solder 2 dwt (3.11g) packet 2 gram packet Comandium 189,000 (1,303) Vera Flux 1.5 oz (42.5g) jar CE 0120 Class IIa medical device in compliance with Directive 93/42/ECC 24 0120 License No. 296734; United States of America Department of Health and Human Services Food & Drug Administration (FDA) Aalba Dent products designated with our CCQ mark are Certified by Aalba Dent as continuous cast products from our proprietary state-of-the-art continuous casting technology. Products produced from this process exhibit unparalleled homogeneity, precise alloy chemistry and lower gas content. AalbaDent, Inc. is a registered, medical device manufacturer in compliance with applicable Good Manufacturing Practices Regulations, Federal/State laws, local environmental laws and regulations. Facility license No. 61179; State of California: Department of Health Services: Food & Drug Branch. 25