Issue link: https://aalbadent.uberflip.com/i/107865
VeraSoft C&B:Ni-Cr ® LAB & PATIENT FRIENDLY VeraSoft is a premium, type 4, VeraSoft provides the proof With lower hardness value and base metal alloys in non-ceramic nickel-chromium alloy for cast metal strength of a type 4 alloy and a high elongation, VeraSoft allows for applications. When a traditional crown and bridge restorations in burnishability index similar to that simple fabrication and time-saving ceramic base metal alloy is non-ceramic applications. Years of found in type 3 crown and bridge adjustments in your practice. You will inappropriate for a non-ceramic clinical service have proven VeraSoft alloys. You can trust VeraSoft's benefit from VeraSoft's lowered application, save time and money; to be durable, effective, and clinically performance in thin sections that are melting range, great castability, easy use VeraSoft. acceptable for all your non-ceramic subject to high forces. soldering, and brilliant polishing characteristics. Unlike precious fixed prosthetic restorations. metals, VeraSoft has a low thermal and easy handling characteristics to against intense temperature sensitivity. VeraSoft 194 gram box (40 ingots) conductivity to protect your patients Packaging & Accessories VeraSoft offers economical cost exceed expectations for all traditional Vera Solder 2 dwt (3.11 g) packet 2 gram packet Vera Flux 1.5 oz jar (42.5 g) APPLICATIONS Non-ceramic fixed appliances, full cast crowns (FMC), single units, onlays, multiple unit bridgework, metal sub-structure for veneer crowns using polymer resins (acrylic & composites), posts and cores. 30 ACCESSORIES When soldering is required for repair and or construction, use only nickel based or gold based brazing materials such as our Vera Solder or Aalba Gold Solder and the accompanying flux. Tensile Strength Yield Strength 77,100 (532) 54,700 (377) psi (MPa) VeraSoft psi (MPa) Elongation Percent Vickers Hardness Density Color Melting Range Composition Type 14 236 7.7 White 1,994-2,228 (1,090-1,220) Ni 53.6% Mn 19.5% Cr 14.5% Cu, Al, Si, Fe 4 % HV1 g/cm3 °F (°C) 0120 31