Aalba Dent

VeraSoft ES C&B:Ni-Cr ® EXTRA SOFT FORMULATION The new VeraSoft ES alloy... where "ES" equals "Extra Soft". With true conductivity to protect your patients VeraSoft ES is CE marked and clinically against temperature sensitivity. approved (FDA) for all your cast metal crown and bridge restorations in non- induction casting properties. When ceramic applications. torch casting VeraSoft ES, oxygen and cally from VeraSoft ES's easy handling fuel are required. VeraSoft ES also has characteristics. Save time and money ness value (185 Vickers) and very high Vera Flux 1.5 oz jar (42.5 g) metals, VeraSoft ES has a low thermal ceptable restorations for your patients. Vera Solder 2 dwt (3.11 g) packet 2 gram packet to a brilliant luster and unlike precious durable, effective, and clinically ac- VeraSoft ES 215 gram box (40 ingots) with the patient. VeraSoft ES polishes type 3 properties, VeraSoft ES provides Packaging & Accessories ments in the laboratory or chair-side excellent thermal stability which resists with VeraSoft ES. elongation (24%), far exceeding that distortion during soldering procedures. VeraSoft ES provides a low hard- 32 Your practice will benefit economi- of other base-metal alloys. This yields excellent burnishability, allowing simple fabrication and time-saving adjust- Tensile Strength APPLICATIONS Non-ceramic fixed appliances, full cast crowns (FMC), single units, onlays, multiple unit bridgework, metal substructure for veneer crowns using polymer resins (acrylic & composites), post and cores. VeraSoft ES ingots facilitate good ACCESSORIES When soldering is required for repair and or construction, use only nickel based or gold based brazing materials such as our Vera Solder or Aalba Gold Solder and the accompanying flux. Yield Strength 88,160 (608) 43,210 (298) psi (MPa) VeraSoft ES psi (MPa) Elongation Percent % 24 Vickers Hardness Density Color Melting Range Composition Type 185 8.5 White 2,075-2,458 (1,135-1,348) Ni 76.5% Cu 11.5% Cr 5.0% Sn, Si 3 HV1 g/cm3 °F (°C) 0120 33

• Cover