Issue link: https://aalbadent.uberflip.com/i/107869
Denture Mechanical Properties Estructura de Prótesis Parciales Subestructuras para Coronas de Polímero y Puentes de Resina Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Tipo 5 FDA, CE, NIOM, CCq 2,507-2,552 (1,375-1,400) Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Tipo 5 FDA, CE, NIOM, CCq 2,480-2,534 (1,360-1,390) Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Tipo 5 FDA, CE, NIOM, CCq 2,507-2,552 (1,375-1,400) Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Tipo 5 FDA, CE, NIOM, CCq 2,480-2,534 (1,360-1,390) Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Tipo 5 FDA, CE, NIOM 2,507-2,552 (1,375-1,400) Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Tipo 5 FDA, CE, NIOM 2,480-2,534 (1,360-1,390) °F (°C) License No. 296734; United States of America Department of Health and Human Services Food & Drug Administration (FDA) PFM PFM Unidades Indviduales y Puentes de Múltiples Unidades Onlays, Postes y Espigas Registros y Certificationes Composición Restauraciones Cerámicas Coronas y Puentes Clasificación de Propiedades ISO Rango de Fusión Aalba Dent products designated with our CCQ mark are Certified by Aalba Dent as continuous cast products from our proprietary state-of-the-art continuous casting technology. Products produced from this process exhibit unparalleled homogeneity, precise alloy chemistry and lower gas content. SuperEstructuras de Implantes Puente Maryland AalbaDent, Inc. is a registered, medical device manufacturer in compliance with applicable Good Manufacturing Practices Regulations, Federal/State laws, local environmental laws and regulations. Facility license No. 61179; State of California: Department of Health Services: Food & Drug Branch. 43