Issue link: https://aalbadent.uberflip.com/i/75931
C&B Mechanical Properties Melting Range °F (°C) Composition Restorations PFM Ceramic Crown & Bridge FMC Partial Denture Framework Single Units & Multi Unit Bridgework Onlays, Posts & Cores Sub-Structure for Polymer Crown & Bridge Resins Structures Implant Super Maryland Bridge Classification of Properties ISO Registrations & Certifications 1,850-1,950 (1,012-1,068) 1,850-1,950 (1,012-1,068) Cu 80.7% Al 7.8% Ni 4.3% Fe, Zn, Mn Cu 78.7% Al 7.8% Au 2% Ni, Fe, Zn, Mn Type 3 FDA, CE, CCq Type 2 FDA, CE, CCq 1,994-2,228 (1,090-1,220) 2,075-2,458 (1,135-1,348) Ni 53.6% Mn 19.5% Cr 14.5% Cu, Al, Si Ni 76.5% Cu 11.5% Cr 5.0% Sn, Si Type 4 FDA, CE, CCq Type 3 FDA, CE, CCq License No. 296734; United States of America Department of Health and Human Services Food & Drug Administration (FDA) Aalba Dent products designated with our CCQ mark are Certified by Aalba Dent as continuous cast products from our proprietary state-of-the-art continuous casting tech- nology. Products produced from this process exhibit unparalleled homogeneity, precise alloy chemistry and lower gas content. AalbaDent, Inc. is a registered, medical device manufacturer in compliance with applicable Good Manufacturing Practices Regulations, Federal/State laws, local environmental laws and regulations. Facility license No. 61179; State of California: Department of Health Services: Food & Drug Branch. 35