Partial Denture:Co-Cr-Mo
allowing you to design slender cross-sectional areas which exhibit high strength and elasticity. Vera PDS eliminates your worries of clasp failure under constantly changing masticatory pressures. Vera PDS is produced via electro-
decades of service. Its non-tarnishing and corrosion-resistant formula displays excellent clinical efficacy, while providing mechanical properties which exceed industry standards…
magnetic thermal processing which delivers precise homogenization of all alloying constituents. Vera PDS is available in both "hard" and "regular" formulations;
the classic "hard" formulation provides maximum resistance to deformation, while the "regular" formulation allows extra forgive- ness when multiple adjustments maybe required.
Strength psi (MPa)
Tensile
Vera PDS (Hard)
Vera PDS (Regular)
109,500 (755)
109,500 (755)
Strength psi (MPa)
Yield
98,000 (675)
86,500 (597)
Modulus of
Elasticity psi (MPa) X106
26.1 (0.18) 26.1 (0.18)
Elongation
Percent %
6 7
Hardness HV1
Vickers 359 354
Density g/cm3
8.7 8.7
Color White White
Melting Range °F (°C)
2,480-2,534 (1,360-1,390)
2,507-2,552 (1,375-1,400)
Composition
Co 63.5% Cr 27.0% Mo 5.5%
Fe, Ni, Si, Mn
Co 63.5% Cr 27.0% Mo 5.5%
Fe, Ni, Si, Mn 41
NIOM certified
