Aalba Dent

Denture Mechanical Properties Melting Range °F (°C) Composition Restorations PFM Ceramic Crown & Bridge FMC Partial Denture Framework Single Units & Multi Unit Bridgework Onlays, Posts & Cores Sub-Structure for Polymer Crown & Bridge Resins Structures Implant Super Maryland Bridge Classification of Properties ISO Registrations & Certifications 2,480-2,534 (1,360-1,390) 2,507-2,552 (1,375-1,400) 2,480-2,534 (1,360-1,390) 2,507-2,552 (1,375-1,400) 2,480-2,534 (1,360-1,390) 2,507-2,552 (1,375-1,400) Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Co 63.5% Cr 27.0% Mo 5.5% Fe, Ni, Si, Mn Type 5 Type 5 Type 5 Type 5 Type 5 Type 5 FDA, CE, NIOM, CCq FDA, CE, NIOM, CCq FDA, CE, NIOM, CCq FDA, CE, NIOM, CCq FDA, CE, NIOM FDA, CE, NIOM License No. 296734; United States of America Department of Health and Human Services Food & Drug Administration (FDA) Aalba Dent products designated with our CCQ mark are Certified by Aalba Dent as continuous cast products from our proprietary state-of-the-art continuous casting tech- nology. Products produced from this process exhibit unparalleled homogeneity, precise alloy chemistry and lower gas content. AalbaDent, Inc. is a registered, medical device manufacturer in compliance with applicable Good Manufacturing Practices Regulations, Federal/State laws, local environmental laws and regulations. Facility license No. 61179; State of California: Department of Health Services: Food & Drug Branch. 43

• Cover