Issue link: https://aalbadent.uberflip.com/i/83563
PFM Mechanical Properties Expansión Térmica (@500°C) X10-6 Coeficiente de Rango de Fusión °F (°C) Composición Restauraciones Cerámicas PFM Coronas y Puentes PFM Estructura de Prótesis Parciales Unidades Indviduales y Puentes de Múltiples Unidades 14.0 14.1 13.8 13.7 2,120-2,327 (1,160-1,275) 2,192-2,399 (1,200-1,315) 2,124-2,282 (1,162-1,250) 2,354-2,435 (1,290-1,335) Ni 77.9% Cr 12.6% Mo 5.0% Al, Be, Co Ni 75.5% Cr 11.5% Mo 3.5% Nb, Al, Si Ni 74.8% Cr 12.7% Mo 9.0% Al, Be, Co Ni 78.5% Cr 12.8% Mo 9.0% Nb, Al, Si Postes y Espigas Subestructuras para Coronas de Polímero y Puentes de Resina Estructuras de Implantes Super- Puente Maryland Clasificación de Propiedades ISO Registros y Certificationes Tipo 5 Tipo 5 Tipo 5 Tipo 5 FDA, CCq FDA, CE, CCq FDA, CCq FDA, CE, NIOM, CCq 14.3 13.8 2,132-2,521 (1,167-1,383) 2,110-2,403 (1,154-1,317) Ni 76.9% Cr 15.0% Mo 4.7% Al, Be, Ti Ni 71.9% Cr 16.0% Mo 9.0% Al, Be, Ti Tipo 5 Tipo 5 FDA, CE, CCq FDA, CE, CCq 14.3 14.3 2,129-2,363 (1,165-1,295) 2,147-2,357 (1,175-1,292) Ni 78.0% Cr 13.0% Mo 4.7% Al, Be, Ti Ni 76.0% Cr 12.0% Cb 3.95% Mo, Al, Si, Ti License No. 296734; United States of America Department of Health and Human Services Food & Drug Administration (FDA) Aalba Dent products designated with our CCQ mark are Certified by Aalba Dent as continuous cast products from our proprietary state-of-the-art continuous casting tech- nology. Products produced from this process exhibit unparalleled homogeneity, precise alloy chemistry and lower gas content. Tipo 5 Tipo 5 FDA, CCq FDA, CCq AalbaDent, Inc. is a registered, medical device manufacturer in compliance with applicable Good Manufacturing Practices Regulations, Federal/State laws, local environmental laws and regulations. Facility license No. 61179; State of California: Department of Health Services: Food & Drug Branch. 25